Videos for El-Exis SP Injection Molding Machines

This page contains 6 videos for Sumitomo (SHI) Demag's EL-Exis SP ultra-high-speed hybrid injection molding machines. Please be sure to scroll down the page to see all 6 videos.

To be informed when new Sumitomo (SHI) Demag videos are available, please subscribe to our site on youtube.com at the following link: youtube.com/SSDinNA. Just use the Subscribe button at the top next to our site name.

  

El-Exis SP 200 IML Packaging Molding on 1.78-Second Cycle

In this molding demo, an El-Exis SP 200-920 high-speed injection molding machine molds four, thin-wall containers with in-mold decorating on a 1.78-second cycle. The PP containers have a 0.32 mm wall thickness and measure 83 x 32 mm.

  

El-Exis SP 420 Injection Compression Packaging Molding Demo

In this molding demo, an El-Exis SP 420-3000 hybrid injection molding machine molds thin-wall containers on a 3.51-second cycle. Using injection compression can result in material savings up to 25%. In this example, the parts weigh 23 grams versus approximately 31 grams with standard molding. The PP containers are run in a 2 + 2 stack mold.

  

El-Exis SP Cap Molding Demo at NPE 2015

Sumitomo (SHI) Demag El-Exis SP ultra-high-speed hybrid injection molding machine molding 29/25 still water (non-carbonated) caps with tamper evident band molded by mechanical slides. Cap is HDPE and weighs 1.2 grams. In this demo, 96 caps are being molded every 1.849 seconds.

  

El-Exis SP 200-920 In-mold Labeling Demonstration

Sumitomo (SHI) Demag El-Exis SP 200-920 hybrid injection molding machine demonstrating in-mold labeling. This demo is a full in-mold-labeling cell that features complete coverage of the plastic surface using a unique process developed by Marbach moulds and automation GmbH. The Marbach-developed process uses a "full cover label placer" that inserts the banner and base label in a single stroke.

  

EL-Exis 550-3600 Petri Dish Molding Demonstration

Sumitomo (SHI) Demag EL-Exis 550-3600 hybrid injection molding machine. Demonstration of 16 + 16 petri dish molding.

  

El-Exis SP 420-3000 Molding 96 Water Caps on 1.889-Second Cycle

Sumitomo (SHI) Demag's energy-efficient hybrid El-Exis SP 420-3000 injection molding machine demonstrates ultra-high-speed molding of water bottle caps. Demonstration shows Plastisud 96-cavity cap mold being run on a 1.889 second cycle.

Please use the El-Exis SP Info links (above at left on computer, below on mobile phone) for more information about this series of ultra-high-speed hybrid injection molding machines.