SHC Hydromechanical Series Specifications - METRIC
Please note: These are specifications for a Legacy model. For specifications on current models, please use the links at left.
|
SHC Hydromechanical Series - Metric Units | |||||||
| SH100C | SH130C | SH160C | SH220C | SH280C | SH350C | ||
|
|
Clamping |
100 | 130 | 160 | 220 | 280 | 350 |
|
Tie Bar |
460x410 | 510x460 | 560x510 | 610x560 | 685x635 | 760x710 | |
|
Overall |
660x610 | 720x670 | 800x750 | 890x840 | 970x920 | 1070x1020 | |
| Opening Stroke Max (mm) |
350 | 375 | 430 | 510 | 580 | 700 | |
| Mold Space Min-Max (mm) |
200-410 | 200-450 | 200-500 | 250-580 | 300-620 | 320-670 | |
| Ejector Force Stroke (ton/mm ) |
3.3/100 | 3.3/100 | 4.6/120 | 6.2/150 | 6.2/150 | 7.9/175 | |
|
Plasticizing Unit | C360M | C450M | C560M | C1250L | C1700L | C2500L |
| Screw Diameter (mm) |
32/36/40 | 36/40/45 | 40/45/50 | 50/56/63 | 56/63/71 | 63/71/80 | |
| Injection Weight (g-PS) |
122/155/191 | 155/191/242 | 191/242/298 | 425/533/675 | 580/734/933 | 853/1083/1376 | |
| Injection Capacity ( cm3 ) |
129/163/201 | 163/201/254 | 201/254/314 | 448/562/711 | 611/773/982 | 898/1140/1448 | |
| Injection Pressure (kg/cm2) |
2560/2020/1640 | 2670/2160/1710 | 2520/1990/1610 | 2410/1920/1510 | 2460/1940/1530 | 2430/1910/1500 | |
| Injection Rate (cm3/sec) |
129/163/201 | 153/189/239 | 195/247/305 | 285/357/452 | 284/359/455 | 281/356/452 | |
| Plasticizing Capacity (kg/Hr) |
53/76/101 | 76/101/137 | 102/136/194 | 141/194/266 | 120/164/211 | 120/153/207 | |
Van Dorn Demag is a proud brand of Sumitomo (SHI) Demag.
