SHC Hydromechanical Series Specifications - ENGLISH
Please note: These are specifications for a Legacy model. For specifications on current models, please use the links at left.
|
SHC Hydromechanical Series - English Units | |||||||
| SH100C | SH130C | SH160C | SH220C | SH280C | SH350C | ||
|
|
Clamping |
110 | 143 | 176 | 242 | 308 | 385 |
|
Tie Bar |
18.11x16.14 | 20.08x18.11 | 22.05x20.08 | 24.02x22.05 | 26.97x25.00 | 29.92x27.95 | |
|
Overall |
25.98x24.02 | 28.35x26.38 | 31.50x29.53 | 35.04x33.07 | 38.19x36.22 | 42.13x40.55 | |
| Opening Stroke Min-Max (in) |
0-13.78 | 0-14.76 | 0-16.93 | 0-20.08 | 0-22.83 | 0-27.56 | |
| Mold Space Min-Max (in) |
7.87-16.14 | 7.87-17.72 | 7.87-19.69 | 9.84-22.83 | 11.81-24.41 | 12.60-26.38 | |
| Ejector Force Stroke (T / in) |
3.6/3.94 | 3.6/3.94 | 5.1/4.72 | 6.8/5.91 | 6.8/5.91 | 8.7/6.89 | |
|
Plasticizing Unit | C360M | C450M | C560M | C1250L | C1700L | C2500L |
| Screw Diameter (in) |
1.26/1.42/1.57 | 1.42/1.57/1.77 | 1.57/1.77/1.97 | 1.97/2.20/2.48 | 2.20/2.48/2.80 | 2.48/2.80/3.15 | |
| Injection Weight (oz-PS) |
4.3/5.5/6.7 | 5.5/6.7/8.5 | 6.7/8.5/10.5 | 15.0/18.8/23.8 | 20.5/25.9/32.9 | 30.0/38.2/48.5 | |
| Injection Capacity ( in3 ) |
7.9/9.9/12.3 | 9.9/12.3/15.5 | 12.3/15.5/19.6 | 27.3/34.3/43.4 | 37.3/47.2/59.9 | 54.8/69.5/88.3 | |
| Injection Pressure (Max psi) |
36,400 28,720 23,320 |
37,970 30,720 24,320 |
35,830 28,300 22,890 |
34,270 27,300 21,470 |
34,980 27,590 21,760 |
34,560 27,160 21,330 | |
| Injection Rate (Max in3/sec) |
7.9/9.9/12.3 | 9.3/11.5/14.6 | 11.9/15.1/18.6 | 17.4/21.8/27.6 | 17.3/21.9/27.8 | 17.1/21.7/27.6 | |
| Plasticizing Capacity (Max lb/Hr) |
117/167/222 | 167/222/301 | 224/299/427 | 310/427/585 | 264/361/464 | 264/337/455 | |
Van Dorn Demag is a proud brand of Sumitomo (SHI) Demag.
