SGM Series Specifications - METRIC

Please note: These are specifications for a Legacy model. For specifications on current models, please use the links at left.

		SGM Accumulator-Toggle Series - Metric Units
		SG50M	SG75M	SG100M	SG125M	SG180M	SG260M	SG350M
	Clamping Force (Ton)	50	75	100	125	180	260	350
	Tie Bar Clearance (HxV)(mm)	310x310	360x360	410x410	460x460	510x510	560x560	710x710
	Overall Platen Size (HxV)(mm)	455x455	530x530	610x610	670x670	750x750	840x840	1030x1030
	Opening Stroke Min-Max (mm)	130-250	130-300	150-350	170-375	190-430	210-510	260-610
	Mold Space Min-Max (mm)	160-350	160-410	180-410	130-450	200-500	230-580	300-650
	Ejector Force Stroke (ton/mm)	2.2/70	2.7/80	3.3/100	3.3/100	4.6/120	6.2/150	7.9/175
	Dry Cycle (sec)	1.1	1.2	1.3	1.4	1.5	1.8	2.3
	Plasticizing Unit	C110S	C160S	C250M	C360M	C450M	C900L	C1700L
		C160S	C250M	C360M	C450M	C560M	C1250L	C2500L
	Screw Diameter (mm)	22/25/28	25/28/32	28/32/36	32/36/40	36/40/45	45/50/56	63/71
		25/28/32	28/32/36	32/36/40	36/40/45	40/45/50	50/56/63	71/80
	Injection Weight (g-PS)	38/48/61	53/67/87	81/107/136	122/155/191	155/191/242	313/386/484	734/933
		53/67/87	81/107/136	122/155/191	155/191/242	191/242/298	425/533/675	1083/1376
	Injection Capacity ( cm3 )	40/51/64	56/70/92	86/113/143	129/163/201	163/201/254	329/406/510	773/982
		56/70/92	86/113/143	129/163/201	163/201/254	201/254/314	448/562/711	1140/1448
	Injection Pressure (kg/cm2)	2800/2170/1730	2800/2230/1710	2950/2260/1780	2790/2200/1790	2650/2140/1690	2800/2270/1810	2200/1730
		2800/2230/1710	2950/2260/1780	2790/2200/1790	2650/2140/1690	2800/2210/1790	2800/2230/1760	2100/1650
	Injection Rate (cm3/s)	114/147/185	147/185/241	185/241/305	241/305/377	305/377/477	477/589/739	935/1188
		147/185/241	185/241/305	241/305/377	305/377/477	377/477/589	589/739/935	1188/1508
	Plasticizing Capacity (kg/Hr)	18/25/35	24/35/49	37/53/63	53/76/91	76/101/109	109/154/187	184/189
		18/26/36	37/53/63	53/76/91	76/101/88	102/136/150	125/172/239	165/222