SEEV-A Platform Videos

Sumitomo (SHI) Demag's new SEEV-A Platform of advanced all-electric injection molding machines is available in 13 models sizes from 56 to 562 U.S. tons, for shot sizes from a fractional gram to over 75 ounces. The videos below demonstrate the exceptional speed, precision and applications flexibility of this new machinery series to handle everything from high-speed medical thin-wall molding to large automotive and appliance parts as well as an unbalanced "family" mold.

Click here for information on models from 247 to 562 U.S. tons.

Click here for details on 56 to 202 U.S. ton models.

To be informed when new Sumitomo (SHI) Demag videos are available, please subscribe to our site on youtube.com at the following link: youtube.com/SSDinNA. Just use the Subscribe button at the top next to our site name.

  

SE500EV-AHD Molding 31.1-Inch Automotive Headlamp Lens

A Sumitomo (SHI) Demag SE500EV-AHD all-electric injection molding machine demonstrates high-precision molding of a 31.1-inch automotive headlamp lens using only 302 U.S. tons clamp force. This long flow length part, measuring approximately 236 sq in, would normally be run in a 700 ton machine.

  

SE385EV-AHD Demos 2-Cavity Mold for 31-Inch ABS Air Conditioner Louvers

SE385EV-AHD all-electric injection molding machine running a 2-cavity mold for 31-inch-long air conditioner louvers molded with ABS. The shot mass is 15.3 oz. Sumitomo (SHI) Demag's unique Z-Molding capabilities ensure complete filling and help prevent warping of these difficult-to-mold parts.

  

SE250EV-AHD Runs 16-Cavity Medical Vial Mold on 11.5s Cycle

SE250EV-AHD all-electric injection molding machine demo of a 16-cavity mold producing 50 ml medical vials on an 11.5s cycle. Demonstrates the ability of the SEEV-AHD to run bigger molds on smaller machines with exceptional speed, precision and energy efficiency.

  

SE180EV-A Molding Thin-Wall Medical Dosing Cups on a 2.46s Cycle

SE180EV-A all-electric injection molding machine demo of an 8-cavity mold producing thin-wall medical dosing cups on 2.46-sec cycle. Demonstrates the ability of an all-electric to run a multi-cavity, high-speed, thin-wall application with exceptional precision and energy efficiency.

  

SE50EV-A Demonstrates Complete and Balanced Filling Running an Unbalanced "Family" Mold

SE50EV-A all-electric injection molding demo of an 8-cavity, unbalanced "family" mold for PMMA paper clips. Demonstrates the ability of Z-Molding's Flow Front Control (FFC) system to achieve complete and balanced filling with reduced injection pressure. FFC takes advantage of the energy in the flow front of the resin to complete filling in an even fashion, as opposed to forcing material into open areas and flashing areas that were already filled. Filling takes place at a more consistent rate, eliminating problems such as flash, inconsistent part weights and molded-in stress.
 

Please use the SEEV-A Platform links (above at left on computer, below on mobile phone) for more information about these advanced, high-precision, all-electric injection molding machines.