iM Series Specifications - ENGLISH Units

Please note: These are specifications for a Legacy model. For specifications on current models, please use the links at left.

		iM Hydraulic Series - English Units
		iM18	iM30
	Clamping Force (US Ton)	20	33
	Tie Bar Clearance (HxV)(in)	9.25x9.25	10.24x10.24
	Overall Platen Size (HxV)(in)	13.00x13.00	15.35x15.35
	Opening Stroke Min-Max (in)	0-8.27	0-12.20
	Mold Space Min-Max (in)	5.91- N.A.	7.87-N.A.
	Ejector Force Stroke (T / in)	1.2/1.97
			1.9/1.97
	Plasticizing Unit	C26S	C26S
			C50S
			C75S
			C75S
	Screw Diameter (in)	0.55/0.63/0.71/0.79	0.55/0.63/0.71/0.79
			0.71/0.79/0.87
			0.79/0.87/0.98
			0.79/0.87/0.98
	Injection Weight (oz-PS)	0.22/0.36/0.46/0.57	0.22/0.36/0.46/0.57
			0.8/0.9/1.1
			0.9/1.1/1.4
			0.9/1.1/1.4
	Injection Capacity ( in3 )	0.38/0.67/0.85/1.04	0.38/0.67/0.85/1.04
			1.34/1.65/2.01
			1.65/2.01/2.62
			1.65/2.01/2.62
	Injection Pressure (Max psi)	32,420/34,130/26,880/21,760	32,420/34,130/26,880/21,760
			38,390/31,140/25,740
			39,250/32,420/25,030
			39,250/32,420/25,030
	Injection Rate (Max in3/sec)	2.0/2.6/3.2/4.0	2.0/2.6/3.2/4.0
			4.0/5.0/6.0
			3.8/4.6/6.0
			2.7/3.2/4.2
	Plasticizing Capacity (Max lb/Hr)	11/21/29/35	11/21/29/35
			22/29/40
			29/40/57
			29/40/57